An air source heat pump defrost cycle is a normal part of winter operation. Here’s why frost forms on the outdoor coil, what the steam and brief pause in heating mean, and which signs suggest your system needs checking.
If your heat pump suddenly goes quiet, stops its fan or sends up a cloud of “steam” on a cold day, it can be worrying if you haven’t seen it before. In many cases, it’s simply clearing frost from its outdoor coil so it can keep absorbing heat from the air.
What is a heat pump defrost cycle?
When an air source heat pump is heating your home, its outdoor coil absorbs heat from the outside air. The coil can become colder than the surrounding air. In cold, damp weather, moisture in the air may settle on the coil and freeze.
A light frost is not unusual, but too much ice can restrict airflow and make it harder for the unit to absorb heat. The system’s controls monitor operating conditions and, when needed, start a defrost cycle.
To clear the ice, the heat pump temporarily reverses the direction of its refrigerant circuit. Warm refrigerant passes through the outdoor coil, melting the frost. Once the coil is clear, the system returns to normal heating.
It’s a built-in way of keeping the heat pump working. A defrost cycle doesn’t mean the system is failing, and it isn’t evidence that heat pumps can’t operate in cold weather.
Why does frost form more in some weather?
Frost can form in a range of winter conditions, but it’s more likely when the air is both cold and damp. The risk is often noticeable around freezing, when there is plenty of moisture in the air, and the outdoor coil is cold enough for it to freeze.
Local conditions can make a difference too. A damp valley, coastal air, a shaded position or a particularly exposed location may affect how quickly frost forms around a unit. These are some of the reasons that siting matters: the heat pump needs suitable airflow and enough clear space around it.

What you may see and hear during defrost
A defrost cycle can look and sound different from the heat pump’s usual operation. Homeowners may notice:
- A cloud of white vapour rising from the outdoor unit. This is water vapour from melting frost meeting cold air, not smoke or refrigerant.
- The outdoor fan stopping briefly while the coil warms.
- A brief whoosh, gurgle or change in the unit’s usual sound as the system changes mode.
- A short pause in heat being delivered to the heating system.
These signs are generally normal when they happen briefly, and the system returns to heating afterwards. For more detail on the process, see Grant UK’s guide to heat pump defrost cycles.
How long does a defrost cycle take, and how often should it happen?
A defrost cycle typically lasts a few minutes. How often it happens depends on the weather and the conditions around the unit, so there isn’t one fixed interval that applies to every heat pump or home.
A heat pump may defrost more often during cold, damp weather than during colder but drier conditions. A short pause followed by a return to normal heating is different from a unit that seems to defrost constantly, stays covered in ice, or doesn’t recover its heating afterwards.
If you’re unsure whether your system’s pattern is normal, note the weather, how long the pause lasts, and whether the coil clears. That information can help a qualified engineer assess what’s happening.
Where does the meltwater go?
As frost melts, water runs down through the outdoor unit and drains away beneath it. In freezing weather, some of this water may turn to ice on the ground below. A small amount of water or an occasional patch of ice can therefore be a natural result of defrosting.
The drainage route still needs attention. If water cannot drain away freely, it may collect or freeze beneath the unit. A suitable installation includes a stable base and a clear path for meltwater, while allowing airflow around the equipment.

Normal defrost behaviour or a problem?
A brief pause, a stopped fan and a short cloud of vapour can all be part of normal operation. It’s worth arranging a check if you notice any of the following:
- Ice that builds up on the coil and does not clear after defrosting.
- Ice accumulating around the fan or across much of the unit.
- Water pooling or persistent ice beneath the heat pump, suggesting restricted drainage.
- Long or repeated pauses in heating, or noticeably poorer heating performance.
- An error code or an unusual noise that continues after the cycle.
Don’t try to chip ice off the coil or open the unit yourself. If the system remains iced up or its performance is affected, contact a qualified heat pump engineer. A persistent problem needs assessment, not guesswork.
How good design and servicing help
Siting, airflow and drainage should be considered as part of the system design, not left until frost appears. At Clima Renewables, we assess the property and the proposed outdoor-unit position as part of our air source heat pump installation service. A heat loss survey helps establish the home’s heating requirements so the system can be sized and designed to suit the property.
Correct sizing and design help avoid a system having to work harder than necessary. The installation should also provide airflow clearance, a stable base and a sensible route for meltwater. Controls then manage the heating system’s operation, including defrosting, in response to its conditions.
Routine servicing is another opportunity to check the outdoor coil, fan, drainage, and defrost operation. These checks can help identify issues early and keep the equipment in good working order.

Does defrosting reduce efficiency?
A defrost cycle uses a small amount of energy and briefly interrupts heat delivery while the coil clears. That is part of normal heat pump operation. The cycle helps the unit restore the coil’s ability to absorb heat, rather than allowing ice to restrict its performance.
It’s one reason heat pump performance needs to be considered as part of the whole system. A property assessment and correct design matter more than judging suitability by a visible winter defrost alone. Clima Renewables carries out assessments and installations across Northamptonshire, Cambridgeshire and Bedfordshire.
Frequently asked questions
Is steam from an air source heat pump dangerous?
The white cloud seen during defrost is usually water vapour from melting frost. It is not smoke or refrigerant. If you see persistent smoke or notice an unusual smell, switch off the system if it is safe to do so and seek professional advice.
Should I turn the heat pump off during defrost?
No. Defrosting is an automatic function that clears frost from the outdoor coil. Don’t interrupt the cycle or try to remove ice yourself; contact an engineer if the unit doesn’t clear the ice or return to heating.
Is ice underneath the unit normal?
Meltwater can drip beneath the unit and refreeze in cold weather. If ice keeps building up, creates a hazard or appears to be preventing water from draining away, arrange a check.
Does frequent defrosting always mean there is a fault?
Not necessarily. Defrost frequency varies with weather and site conditions. However, very frequent cycles, persistent ice, error codes or poor heating are reasons to have the system assessed.
A normal cycle, with a few signs to watch
Seeing vapour, hearing a brief change in sound or noticing the fan stop can be part of an ordinary defrost cycle. The key is that the cycle should finish, the ice should clear, and the system should return to heating. Persistent ice or prolonged loss of heating deserves professional attention.
If you’re planning a heat pump or want an assessment of your property, book a heat loss survey. If you already have a system and are concerned about how it is defrosting, contact Clima Renewables to ask about heat pump servicing.
